The reason Camco doesn't recommend using their vinyl trim like # CAM25113 for around openings is because it can expand/contract according to the ambient temperature which can cause leaks if it hasn't been cut long enough. They don't offer anything that's specific for use around windows or openings, but the folks at JR Products tell us that their # 37211245 Premium 3/4 inch RV Vinyl Trim Insert is perfectly acceptable for use around openings like your entry door. view full answer...
Yes, the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding # SR86ZR only comes in black, however this is 15' and it is offered in a longer 30' length should you be interested:
-Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding # SR45ZR.
These trims measure 1/8" wide, 5/8" tall, and 15'/30' long. view full answer...
The Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding # SR78FR that you mentioned is not sold by the foot, so if you need 33', then I recommend using one # SR78FR and one # SR96ZR for a total of 35'.
Since this is a bit longer than what you need you can just trim the excess with a pair of scissors # CG82VR.
Additionally, both of these seals measure the 3/8" wide x 7/8" tall that you need. view full answer...
The trim kit for the Kwikee Heavy Duty Tray Assembly Kit for RV Cargo Compartment # LC370794 is part # LC380319. This is 32" long but can be cut to accommodate the width of your cargo compartment. view full answer...
We do have some options for your 1993 Toyota Motor Home Warrior, but we do not have the trim molding you need.
We do have some options, however, for the rubber insert needed.
-Premium Narrow RV Vinyl Insert Trim Molding # 37211235 which is black in color, 25' long, and is 3/4" wide.
Or
-Premium RV Vinyl Insert Trim Molding # 37210015, which is black in color, 25' long and is 1" wide.
-Premium RV Vinyl Insert... view full answer...
While we do not have what you're looking for, but if storage is the issue, then you can just trim the excess of the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 and glue the pieces back together with the Valterra ABS Solvent Cement # A05-0303.
This will allow you to trim the hose down to a manageable length for your RV and still allow you to use it.
Attached are a couple of videos for you to check out as well.
If you're after something different,... view full answer...
The Alpha Systems Superflex RV Roof Membrane with Installation Kit - White - 35' x 9-1/2' # AL86UV comes with Q130 butyl tape like the Alpha Systems Q130 Butyl Tape for RVs - 30' x 1" x 1/8" - Black - Qty 1 # AL96FJ. This is the type of tape recommended for RV roof repairs on trim, rail and seams, and acts as a gasket of sorts to help protect from moisture seeping through. view full answer...
I was not able to find anything relating to that part number. I was able to find the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding # SR86ZR which is 180" so you'd have to trim this down a bit, but this could potentially work for you.
If the track your current seal sits in is 1/2" wide, then this seal will work as a replacement. If not, let me know some dimensions of your current seal and I'll see if we have something you can use. view full answer...
Essentially you need to measure the height of the garnish from above the lip to the very top. If you can't find one that fits exactly you can get a garnish that's too large and cut it down to size. view full answer...
When it comes to trimming The Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent # MA54FR you will need to use masking tape to mark where you want to make your cut on the garnish. You will then need to use a hand saw to cut along the masking tape.
I attached a review video link below. view full answer...
To really be able to get you what you need we are going to require a bit more info on what you're needing. We do have something like the Valterra Replacement Window Frame for RV Entry Doors # A77012 that could work if your current trim is 15 3/4" wide x 24 3/4" tall, however if not you're going to need to let me know what size frame you're needing or the size of the glass that it houses. view full answer...
To seal any gaps you may have on your 2010 Carriage Cameo RL3 5th wheel, you can use the TremPro 645 Silicone All Purpose Sealant for RVs and Trailers # FAS59FR with the Performance Tool Heavy-Duty Caulk Gun # PTW54295.
This sealant is multi-purpose, can adhere to most non-porous materials such as glass, aluminum, metal, and metal alloys, and because of its clear color it can be used with all paint and trim colors.
We also have this sealant available in white # 0160297, as well as black... view full answer...
The RV Rectangle Red Tail Light can be obtained for the passenger side using part # RVSTB60 and the driver side using part # RVSTB61. If you don't need the license plate tabs you can trim these off. view full answer...
There is not a way I could verify whether or not the Rubber Trim Insert for RV, Marine, and Utility Vehicle Trim Molding # SR78FR would work with your camper. As long as the tracks in the window are 3/4" then this will fit your windows. We do have a 60 day return policy no questions asked if the seal turns out to not fit. view full answer...
I believe we have what you're looking for but I'd recommend just replacing the entire glass and trim with the Lippert Replacement Window Frame with Seal for RV Entry Doors # LC363370.
In my opinion this is going to be a around better solution instead of just replacing just the damaged parts, and you'd get all brand new pieces. Also, the glass itself measures 12" x 21" and the trim measures 15-3/4" wide x 25" tall. view full answer...
The best replacement we have for your discontinued Dometic DOTR12C microwave is the Greystone Standard RV Microwave # 324-000106.
Without the trim kit, this microwave measures 19" wide x 12" tall x 14-1/4" deep, and with the trim kit it is 23-3/8" wide x 15" tall x 14-1/4" deep.
This microwave does not come with wall--mount brackets, however you should easily be able to source this at your local hardware store. view full answer...
While we do not carry the mounting brackets that you need, we do carry plenty of exterior ladder options for your travel trailer.
If you're interested, I recommend checking out the Surco Exterior RV Ladder # SP502L.
This ladder measures 84-1/2" tall, 12" wide, and has integrated mounting brackets that pivot to fit the contours of your RV roof.
Additionally, the legs can be trimmed to fit the height of your RV should you not need the full 84-1/2". view full answer...
Sure thing!
I believe the sliding piece that you're looking for that goes with the Replacement Screen Door Latch for Right Swinging RV Entry Doors # LC27UD is the:
-Replacement Slide for P-Series RV Screen Doors # A77022.
This piece measures 11-7/8" wide x 11-11/16" tall x 3/4" thick", and it can also be trimmed to more accurately fit your door.
I have also included an review video of # A77022 for you to check out as well. view full answer...
It sounds like you're looking for a replacement ceiling garnish for your MaxxAir MaxxFan RV roof vent. If that's what you're after, we have the Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent # MA54FR.
This garnish will fit the MA00-04000K, MA00-04002K, MA00A04301K, MA00A04401K, MA00-04500K, or MA00-04751KSX roof vents. view full answer...
The Rubber Hollow Bulb Seal for RV and Trailer Door - Stick On # CS45FR is one piece and is 25 foot long. You can use scissors to trim the extra unwanted seal. The EPDM rubber won't shrink, crack, or fade over time. view full answer...
Go To Results